Stainless Steel Links for Herm Sprenger Neck Tech English Bulldog Collar
If you need additional links for
19 Inches Neck Tech Pinch Collar, you can get them here. One link
will add 1 1/4 inch (3 cm) to the total collar length. Links are made of stainless steel. Stainless steel
is not likely to corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high-salinity, or poor air-circulation environments. The reason is that it contains sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal's internal structure.
| Key features of this English Bulldog Link: - Corrosion resistance
- Extra strength
- Stainless steel material
- Links are easy to remove/add
| Intended use of this English Bulldog Link: |
| Size of the link: | Material: |
If you are not sure how to add/remove links to the collar here is the instruction: - Select which link you would like to open.
- Using needle nose pliers bend the prongs on the link outward.
- Bend until you have made enough room to slide the link off.
- Remove the link.
- Add or remove links as needed to correctly size your collar.
- To reattach, slide the links back together and close using needle nose pliers.
